Magnetize them! 🧲 Bring your Machines of Prodigy to life

In this tutorial we're going to show not only how to assemble your Sisters' Machines of Prodigy, but also how to put mobile joints, so you'll be able to change the pose of the model whenever you want, and make them look even more alive on the battlefield!

1 - Gather the tools needed to complete this tutorial:

- Hobby pliers
- Cyanoacrylate glue
- Magnets: 3mm (for arms) and 5mm (for legs)

2 - Separate and clean the pieces - assemble pilot separately

3 - Using the pliers, cut the ball joints of the arms

4 - Glue the 3mm magnets on the flat surface. Also glue magnets inside the hole in the body of the mech

Attention: Mind the polarity of the magnets, you don't want to glue the wrong side...

5 - Repeat procedure for the legs using the 5mm magnets

THERE YOU GO!
Now your have your Machines of Prodigy assembled...with mobile joints!

We hope this tutorial was helpful and inspiring to you!
Don't hesitate to share, forward the article, and post your feedback in comments!

Also don't be shy, please share your photos in our Painting Group on Facebook, we'd love to see your take on this!

Want to see more?

Check out this video and more photos of the Machines of Prodigy here!